Online information source for semiconductor professionals
New Product: Electroplated metals abatement from BOC Edwards manages waste
Popular articles
Micron moving fast on Hynix in Q208 NAND flash rankings, says iSuppli - 19 August 2008
Numonyx to close California Technology Center - 12 August 2008
Qimonda starts major reorganization: exits PC DRAM market - 13 October 2008
Micron close to Inotera share purchase, says Gartner - 06 October 2008
Applied Materials sees higher CapEx spending for 2009 - 15 August 2008
Product Briefing Outline: BOC Edwards has launched a
new ‘EPMA'(electroplated metals abatement system) product, which offers
simplified liquid waste treatment and lower cost of ownership than
conventional approaches. The first system has been installed and is operational in a major US electronics manufacturing facility where it processes metal laden waste streams from both CMP and multiple plating operations in a single integrated process.
Problem: Metallization steps for semiconductor, MRAM, disk platen, and disk head manufacturing produce large volumes of dilute waste with relatively low concentrations of metals including copper, nickel, cobalt and iron. These wastes are produced by post-plating rinse and by planarization steps. Metal ions in effluent streams are biocides: chemical agents capable of destroying living organisms, which have strict government regulated discharge limits. These plating processes generate large volumes of dilute metal-contaminated wastewater and may also contain hydrogen-evolving reactants that create a localized and accumulative safety hazard. Most of the metals are regulated and must be removed before the liquid waste can be discharged. However, the large volumes and dilute concentrations make traditional treatment methods, such as precipitation, economically less viable.
Solution: Unlike traditional methods that involve either transporting large volumes of material for off-site processing or managing multiple precipitation based processes, and the solid waste that they create, EPMA greatly simplifies the task of managing waste from electrochemical deposition processes. The EPMA system removes metals from both CMP and plating rinse streams, discharging a final effluent with very low metals concentrations, and producing a highly concentrated metal bearing waste. The system combines a novel fluidized bed ion exchange system and a multiple stage nano-filtration unit, such that waste volumes are reduced by factors of 1,000 to 1 or more, and metals in the concentrated waste exceed 20,000 ppm.
Applications: Metallization steps for semiconductor, MRAM, disk platen, and disk head manufacturing
Platform: Available in 2-, 10- and 100-gpm facility configurations based on a modular, expandable package.
Availability: July 2006 onwards.